Home > EPON ONU >

V-Sol 4FE EPON ONU Optical Network Unit Reserve POE V2810E-PD

Product Categories

GPON ONT [56]
GPON OLT [32]
GPON ONU [50]
EPON ONU [32]
EPON OLT [26]
Dual Mode ONU [80]
XPON MDU [24]
WiFi Mesh Routers [26]
5G CPE Router [12]
4G CPE Router [20]
Ethernet Network Switch [20]
Fiber Optical Amplifier [6]
FTTH Optical Receiver [6]
Fiber Optical Transmitter [6]
PLC Fiber Optic Splitter [8]
VoIP Gateway Device [16]

Guangzhou V-Solution Telecommunication Technology Co., Ltd.

Contact Now

V-Sol 4FE EPON ONU Optical Network Unit Reserve POE V2810E-PD

Ask Lasest Price
Brand Name :	V-solution
Model Number :	V2810E-4PD
Price :	Negotiable
Payment Terms :	Negotiable
Supply Ability :	10000 pcs/day
Delivery Time :	3-5 days

Add to Cart

Product Details
Company Profile

V-Sol 4FE EPON ONU Optical Network Unit Reserve POE V2810E-PD

V-Sol EPON ONU Reverse Poe Onu With 1EPON + 4FE + Reserve POE

Product Description

V2810E-PD EPON Reverse PoE(PD) ONU with reverse PoE is designed for fulfilling FTTH request of telecom operators, internet access of SOHO. This product is support EPON model or GPON model, which has high performance/price ratio, and the technology of layer 2 Ethernet switch as well.

It is also fully compliant to technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment (V2.1) from China Telecom, Its GPON model is fully compliant to ITU-TG.984.x. ONU is powered by the power sourcing equipment (PSE) deployed in users' residences, applied in scenarios where there is no alternating current (AC) power supply in corridors.

4xFE Reverse PoE EPON ONU

Key Features

Support Strict,Weighted,or mixed mode QoS.
Integrated 1:1 VLAN, VLAN reusing, VLAN trunk, etc.
Support port monitoring, port mirroring, port rate limiting, port SLA, etc.
Support auto polarity detection of Ethernet ports (AUTO MDIX).
Support layer 2 Policy Control
Support IPv4 IGMP snooping and IPv6 MLD snooping
Shared 1Mbit on-chip memory-based switch fabric with true non-blocking switching performance.
8K MAC address entries with automatic learning and aging.
Per port programmable MAC address limiting.
802.1Q VLAN support for the full 4,096 VLAN IDs.
Quality of Service support with four traffic classes..

Application

Specifications

LED	Mark	Status	Description
Power	PWR	On	The device is powered up.
Power	PWR	Off	The device is powered down.
Optical signal loss	LOS	Blink	Device does not receive optical signals.
Optical signal loss	LOS	Off	Device has received optical signal.
Registration	REG	On	The device is registered to the PON system.
		Off	Device is not registered to the PON system.
		Blink	Device registration is incorrect.
		Fast Blink	Port is sending or/and receiving data.
Interface	LINK/ACT	On	Port is connected properly .
		Off	Port connection exception or not connected.
		Blink	Port is sending or/and receiving data.
Powered Device	POE	On	Device Powered by the PSE.
Powered Device	POE	Off	Device Powered by the DC.
System	SYS	On / Off	System is not running or fatal error
System	SYS	Blink	Normal running

Interface Description

Port Type	Function
PON	Connect PON port with internet by SC/UPC type, single mode optical fiber cable.
LAN 1/2/3/4	Connect device with ethernet port by RJ45 cat5 cable.
POE	Connect power sourcing equipment (PSE).
RST	Press down reset button and keep1-5seconds to make the device restart and recover from the factory default settings.
DC12V	Connect with power adapter.

Product Tags:


*From:	Your email address is incorrect!
*To:	Guangzhou V-Solution Telecommunication Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!